dodge.pickup.olympus.cx

Right now I have 3.07 gears and single wheel 1990 4x4 with 727 3sp.I found a 2wd 1992 dually with 3.54 and 5sp was goin to use the rearend to covert mine to dually and swap front gears later.Right now the auto truck is gear bound bad @ 65-70 mph would this swap kill my low end power very much plan...

I have an 04 F350 crew cab dually with a 93 intercooled 12 valve in it. Everything went very smooth except I can't get it to start. It turns over fine and I have oil pressure, I have fuel squirting out of the fuel lines at the back of the injectors but it doesn't even act like it wants to start. ...

i was wondering if the bolt pattern in a 5.9 pick up and a 5.9 in a 91 bus are the same?? thanks

i have a 92 w350 when i got the truck it had no front drive shaft after calling a million places i finally found one but the universal cups on it are huge an wont fit in my yoke on the rear how many diff yokes and universals did dodge use to mate the shaft to the front rear

Does anybody have a tailgate with hardware for sale or know where I can get one? I don't want a generic one. I want one that says Dodge like the one that came on my truck. Thanks

I need help. There is a 90 CTD, non-IC, no OD, bone stock that I have been driving around the farm for a week cuz someone left it at my house. I drove it yesterday. Now it will not crank. It has always started right up. It is getting fuel to the IP because I cracked the line and primed it...

anyone mess with one of these gauges? when i put it in i was getting a solid 17psi, couple days later it was deviating around 4 psi now its around 8 psi. I put in an autometer snubber and that helped a little but it still likes to bounce around alot. I have a low pressure piston lift pump, the...

I have a pair of axles from a 69 or 70 dodge ton truck power wagon, i dont know what the ratio is on them but they're in good working shape. i also have the 4speed transmission and transfer case from the same truck also in good working shape. i would like some opinions on how much they are worth as...

So I drove over a speed bump the other day and it was a lot worse than I expected. When the pickup bounced off of it I felt it bottom out, I didn't think much about it, except for holy S and how much I hate speed bumps. Well yesterday I noticed my downpipe has a good sized mash in it, the front...

so i turned in the fuel screw in 3 turns smoke screw has been turned in about flush with nut and starwheel is all the way down.... turned the fuel screw in tonight started it up and now it kind of lopes.... shut it down and tried it again... same thing... when i tap the fuel pedal it sounds like...

1993 auto dually ext cab. what you guys think it will get? all stock. i have been looking for a truck and didn't really want a dually or a ext cab but found a clean one. thanks kyle

my buddys truck is a 90 or 91 and we have to put in a new one but the one for his truck was eather a top fill or something but hes putting one out of the 92s in it and he needs the newer style thermosat housing with the 90* bend in it so t will fit. anybody know were you can find oem cummins parts...

how hard is it too rebuild a HT3B i need like pictures and guides

Ok here is the deal. I have a 93 Cummins CC 4x4 with 518 automatic that I am swapping to an nv4500. I am currently finalizing all the parts I need and I think I have them all. I have done my research and just want to make sure I am not missing anything. So far the list is: - Flywheel -...

Alright sorry if this is a re-post, I did do a search and couldn't really find what I was looking for. I just bought a new alternator and serpentine belt and it still won't charge the battery, I'm running a pretty new optima red top also so I know it's not the battery.. Can't find any fuse...

I have recently put one on my truck and was wondering how hot everyone else is running?

Does anyone know what the differences are between the 89-93 and 94-98 12 valve engine? besides being intercooled. I tried a search but I'm not really finding what I am looking for. if I missed it somehow just slap me... then post the link lol Thanks

Basically, long story short, on my 93 dually, I tore up an outer rear wheel bearing. In doing so, it also tore up my rear hub that houses the wheel bearings. Does anyone know where in the world I can find one of these?? I've had no luck and I basically needed this thing back together like...

i mistakeingly put short bed in the other thread i made about this. Sorry about that but I am looking for a long bed with no rust or dents but i am not that stingent on either mainly just rust! but if any one has a long bed out there in good shape i might b wanting to take it off your hands I live...

Hi guys! I was wondering what turbo upgrade would be best for me based on your opinions... I have 90 3/4 ton that is my daily driver and I tow some with it. The pump is turned up and I plan on getting a M2 pin and gov spring. I also plan on getting some 4" turbo back exhaust and some 40hp...